STARSHIP ENERGY SYSTEMS.
------------------------
This text discusses an energy system specifically designed as the main
power supply for starships.  The system is intended to supply the main
propulsion system of the ship. The main propulsion system is constructed
so that the tube from the energyplane 2 source goes directly to a "crystal 
ball" where the propulsion force is generated.  The injection amplifiers and 
other necessary equipment for the main propulsion system are driven by a
HELENE oscillator.The oscillator is equipped with it's own energyplane 2 source 
and modulator. This source is independent of the 
source used in the main propulsion system.

The propulsion system modulator consists of a tube approximately 2 meters in
diameter and 6 meters long.  The tube contains 1000 injection electrodes.
If a crystal modulator is used, the crystal must also have 1000 electrodes.
The main propulsion modulator can have approximately 1000 channels.  
Each channel must provide
+/- 1000000 Volt PEP and have a frequency range from DC to 1 GHz.  The power in
each channel amplifier must be 1000 Watts minimum.  If a crystal modulator is
used, each channel must have +/- 1000 Volt with a frequency range from DC to 1
GHz. The minimum required power is 10 Watts per channel.  Within the modulator
a frequency picture is generated which is at the correct phase with respect to
a target star.  This frequency picture is used to generate the attractive force
which draws the ship to the star (this is system B for interstellar travel).

There are also 2 other modulators in the ship.  These modulators are used to
create the compensation field allowing the ship to travel faster than the
speed of light.  Each of these 2 modulators has it's own generator and
amplification system.  There is also a third extra modulator.  This modulator
generates the antigravity field surrounding the ship, which is used to repel
meteors and other things encountered during space flight.  This modulator can
be further modulated by a subfrequency picture which creates a cloaking
(invisibility) field.  The antigravity system is also used for precision
steering when the ship is within a planetary atmosphere.

The ship described here is the cigar-shaped "mother ship" type.  In the drawing
is shown only the HELENE oscillator and the main propulsion system modulator.
Normally the main propulsion system circuitry draws approximately 10000000
Watts from the HELENE oscillator.  This oscillator is the heart of the ship's
powersupply system.  The power generated by this oscillator, as much as it is,
is still negligible when compared to the power generated by the ship's main
propulsion system when the ship is engaged in interstellar travel.


