File Menu                                           <Page 1>

Print Document

Send  document  currently  held   in  memory to printer. All
Calamus  printer  functions  are controlled by this command.

Select the "Print Document" menu command and  make  sure the
following buttons are correctly set for error free printing:

        1. Install the correct PRINTER DRIVER.
        2. Set proper printer RESOLUTION.
        3. Set correct PAPER SIZE.
        4. Set OUTPUT PORT for printer attached.
        5. When printing gray scales or images, 
           set RASTER factor accordingly.

Click on the "Print"  button within the dialog box to  spool
document to printer.

When using a 1 or 2 megabyte ST computer to drive the SLM804 
printer, you might encounter  memory  problems when printing 
large documents. To solve this  problem use the "TODISK.CPD" 
printer  driver. This  will spool  the  document  to  a disk 
file within the "PRINTER" folder. The spooled  document file
can then be  outputted  to  the  SLM804  printer  using  the
"DISK_PRT.PRG" program. In order to spool that file you will
have to exit Calamus and boot-up the above program. 

                                      Continued on next page

                                                    <Page 2>

Refer to pages XII-4, XII-5, XII-6, XXI-2 and chapter XXI in 
the Calamus manual.



