        ******************  M2624T  *****************
                        FUJITSU (AT-BUS)
         Gesamtkapazitt (formatiert)         513.51 MB
         Kpfe (phys.)                         12
         Zylinder (phys.)                    1435
         Kpfe (log.)                          16
         Zylinder (log.)                      995
         Sektoren                              63
         Buffer                                64 KB
     Ŀ
      POWER                                                       
                                              7531             
           Ŀ  SW1                            8642 CNH1        
           Ŀ                                            
                6factory setting                SPINDLESYNC
                5Master/slave                      execution(option)
                4W/R LONG MODE 7B              SPSYNC signal
                3Write protect                      input mode(option)
                2SPSYNC signal line con.      Reserved   
                1IORDY sign output           Reserved   
                                                             
     I/F                                                   LED    
     Conn.                                                 conn.    
           Ŀ                                                      
                                                           
                                                                     
           

            STANDARD Factory setup:

            ONĿ(Standardeinstellung)
             Ŀ Ŀ Ŀ Ŀ Ŀ Ŀ 
                     SW1
            
               1   2   3   4   5   6
                              
                               OFF: For factory use
                            OFF: Master drive
                         OFF: 4-Bytes-ECC  / ON: 7-Bytes-ECC
                      OFF: Write protect disabled
                   OFF: SPYNC line is disabled
                OFF: IORDY output is disabled

               CNH1

                7  5  3  1    1-2 open:  Spindle Sync not executed
               Ŀ  3-4 open:  SPSYNC signal is inm output mode
               ݳݳ0 0   5-6 jumper: Reserved
               ݳݳ0 0   7-8 jumper: Reserved
               
                8  6  4  2

