                  Maxtor Original Fabrication Panther SCSI  

                                                                  POWER
Ŀ
        J1  (SCSI CONNECTOR)                                     J3     
       Ŀ  Ŀ   Ĵ
                                           J6     J2                  
 .. JP10                                                    
 .. JP11                              JP5 ..                              
                                      JP6 ..   .. JP3                     
                                                              Ŀ    
                                                 .. JP4         U1      
                                                Ŀ                   
                                                U13             
                                                 ..JP2     Ŀ  
Ŀ  .. JP9                                     Ŀ    U2    
                                                   U7        Ĵ  
J                                    JP8 ..                    U3    
4                                                 
                                                                         
                                                                        
                                                                          
                                                                          
                                                    Ŀ     
                                                         J5             

 
Ŀ
JUMPER NUMBER Description                                   Default     
Ĵ
 JP 2         IN= Write Protected  OUT= Read and Write      OUT         
Ĵ
 JP 5         IN= Slave Sync. Termination                   OUT         
Ĵ
 JP 6         IN= Master Sync. Termination                  OUT         
Ĵ
 JP10         IN= Termination Power supplied by Host        OUT         
Ĵ
 JP11         IN= Termination Power supplied by Drive       IN          

 
                     PC BOARD                               Ŀ
Ĵ     J3       

                       o  o      Pin 9  o  o  o  o  o    Pin 1
                       o  o      Pin 10 o  o  o  o  o    Pin 2
                                  
                         J6                       J2
 
 J2 PINS : 1 & 2:  Remote LED
           3 & 4:  Parity Enable=OFF, Disable=ON
           5 & 6:  MSB Drive ID.  Value when jumpered = 4
           7 & 8:  Drive ID.  Value = 2
          9 & 10:  LSB Drive ID.  Value = 1
 
 
I.E.  For ID 6, Pins 5-6 and 7-8 should be jumpered.  For ID 0, 5-6, 7-8
and 9-10 should all be removed.
 
All other jumpers should are factory set and should not be changed.
 
 
MFG

OS

ABC-Hotline
Billstr. 236
20539 Hamburg
per Fax
