There is a bug in the STE's ROM which doesn't check the RAM configuration
properly when the memory in each of the two banks (0 and 1) is a different
size.  This program circumvents this bug, for 2.5 MB setups.  Note that
the program is not needed if you are using the same RAM in each bank
(ie. you have .5, 1, 2 or 4MB).

The order of installation of SIMMs is important.  Any MAC or PC SIMM will do
as long as it is 120ns or faster.  You must get these in pairs (a SIMM is 8
bits and you are using a 16 bit computer!).

To install 2.5 megs put the SIMMs in the following order:

		(back of STE)
		
		|--- 1MB SIMM ---|
		|-- .5MB SIMM ---|
		|--- 1MB SIMM ---|
		|-- .5MB SIMM ---|

		(front of STE)

The file TWOMEG.PRG *MUST* be the first entry in your AUTO folder.  When first
run it causes a reset - do not worry this only happens after a powerup or cold
start, and is required to set the system up properly.

Tony Hoyle
		thoyle@cix
		Prestel: 219997548
