SCSI_MON schneidet alle Aufrufe des SCSI-Treibers mit. Ohne Optionen
gestartet erfolgt die Ausgabe ber das Programm SYS_MON von Karsten
Isakovic, das vorher installiert wird. Wird SCSI_MON mit der Option "--aux"
gestartet, erfolgt die Ausgabe der Daten ber die serielle Schnittstelle.
Mit der Option "--prt" wird die parallele Schnittstelle benutzt.
SCSI_MON erleichtert das Debuggen von Software, die das SCSI-Treiber-,
CBHD, HDDRIVER, sowie dem PCI SCSI Treiber fr den Milan untersttzte
Softwareinterface benutzt. (HDDRIVER stellt den SCSI-Treiber auch
fr IDE- und ATAPI-Gerte zur Verfgung.)
Falls ein SCSI-Treiber mit Target-Interface installiert ist (HDDRIVER 7.8)
und SCSI_MON als letztes Programm gestartet wird, das das Target-Interface
nutzt, schneidet SCSI_MON zustzlich alle SCSI-Kommandos mit, die an den
Computer geschickt werden, auf dem SCSI_MON luft.
Es ist zu beachten, dass bei Verwendung von SYS_MON der SYS_MON-Bildschirm
whrend der Zeit, in der SCSI-Kommandos vomTarget empfangen werden, nicht
aktiv sein darf. Andernfalls werden diese Kommandos nicht dargestellt.
SCSI_MON setzt TOS 1.02 oder neuer voraus.

SCSI_MON records any call of the SCSI Driver. Started without options,
all data are displayed using the SYS_MON software by Karsten Isakovic,
which is installed first. Started with the option "--aux" the serial port
is used as output device. With "--prt" the parallel port is used.
SCSI_MON helps with debugging software using the SCSI software interface
supported by SCSIDRV, CBHD, HDDRIVER and the PCI SCSI driver for the
Milan. (HDDRIVER also provides the SCSI Driver for IDE and ATAPI devices.)
If a SCSI Driver with target interface is installed (HDDRIVER 7.8) and
SCSI_MON is started after any other software using the target interface,
SCSI_MON additionally records the SCSI commands sent to the computer
where SCSI_MON is running on.
Note that in this case the SYS_MON screen must not be active while SCSI
commands are being received by the target. Otherwise SYS_MON won't
display these commands.
SCSI_MON requires TOS 1.02 or newer.


  Uwe Seimet (us@ooc.de)