BOOTCONF ermglicht das Konfigurieren aller Bootparameter von TT und Falcon,
die im nicht flchtigen RAM (NVM) abgelegt sind. Diese Einstellungen werden
nach einem Reset aktiviert.
Die Videoparameter werden beim Laden der NEWDESK.INF-Datei allerdings wieder
berschrieben. Wird die Bootverzgerung auf weniger als 8 s eingestellt, fhrt
der Falcon keinen Speichertest durch, sondern bootet automatisch, sobald die
interne IDE-Festplatte bereit ist.
Beim TT sind nur die Angaben fr die Bootprferenz und die SCSI-ID von
Bedeutung. Die SCSI-ID wird nur dann ausgewertet, wenn ein Festplattentreiber
verwendet wird, der Initiator-Identifizierung bzw. Bus-Arbitrierung
untersttzt, so wie aktuelle Versionen von CBHD, HuSHI und HDDRIVER.
(Eine Demoversion von HDDRIVER ist verfgbar unter
http://acp5.chemie.uni-kl.de/seimet/atari_german.html oder
fto://acp5.chemie.uni-kl.de/pub/atari/.)
Nicht alle Betriebssysteme, fr die eine Bootprferenz definiert ist, lassen
sich auf diesem Weg booten. Bisher ist dies nur bei TOS und dem Atari SVR4
mglich. Eine falsche Bootprferenz kann dazu fhren, da nicht von Platte
gebootet wird.

With BOOTCONF the Falcon and TT boot parameters which are saved in the non
volatile RAM (NVM) can be configured. The settings are activated after a
reset.
Note that the video parameters are only valid until the file NEWDESK.INF is
read. If the boot delay is less than 8 seconds, the Falcon won't start its
memory test but boots as soon as the internal IDE drive is ready.
On a TT only the boot preference and SCSI ID settings have a meaning. The
SCSI initiator ID is only used with hard disk drivers that support initiator
identification or bus arbitration. Current versions of CBHD, HuSHI or HDDRIVER
do. (For a demo version of HDDRIVER have a look at
http://acp5.chemie.uni-kl.de/seimet/atari_english.html or
ftp://acp5.chemie.uni-kl.de/pub/atari/.)
Some operating systems have a boot preference defined but can't be booted by
setting the corresponding boot preference yet. Currently only TOS and the
Atari SVR4 can be booted this way. Note that bad boot preference settings
can result in the Atari not booting from hard disk.


  Uwe Seimet (Uwe.Seimet@bruker.de, Uwe Seimet @ KA2)