     Einige Worte zur Benutzung von ROMSPEED V3.1

TT und Falcon030 knnen schneller auf das RAM zugreifen, als auf den Inhalt
der ROMS. Kopiert man das ROM ins RAM und sorgt durch geeignete Programmierung
der PMMU des 68030 dafr, da der Prozessor die RAM-Kopie des Betriebssystems
anstatt der ROMs anspricht, ist dies mit einem Geschwindigkeitsvorteil bei der
Ausfhrung von Systemroutinen verbunden. Bei einem TT mit Fast-RAM kann der
Geschwindigkeitszuwachs bis zu 30% ausmachen, beim Falcon ist der Effekt kaum
noch sprbar und liegt bei gut 5%. TTs ohne Fast-RAM profitieren nicht von
ROMSPEED.

Es ist nun aber nicht so, da alle Programme auf dem Atari durch ROMSPEED um
die angegebenen Werte schneller werden. Die Beschleunigung bezieht sich
ausschlielich auf die ehemaligen ROM-Routinen, also auf Aufrufe des GEMDOS,
BIOS, XBIOS, VDI oder AES. Kommt residente Software zum Einsatz, die diese
Systembestandteile ganz oder teilweise durch neue Routinen ersetzt (z.B. NVDI)
fllt der Geschwindigkeitsgewinn geringer aus. Unter Mag!X macht die
Verwendung von ROMSPEED keinen Sinn, da hier das gesamte Betriebssystem
ohnehin schon im RAM liegt. Fr MultiTOS gilt das gleiche.

Wer WINX benutzen will, kann in Verbindung mit ROMSPEED auf GEMRAM verzichten.
ROMSPEED wird von WINX erkannt und WINX patcht in diesem Fall direkt die
ROM-Kopie, die von ROMSPEED im RAM angelegt wurde. ROMSPEED mu zu diesem
Zweck natrlich vor WINX gestartet worden sein.

ROMSPEED wird normalerweise (aber nicht notwendigerweise) aus dem AUTO-Ordner
heraus gestartet. Man sollte nicht bersehen, da ROMSPEED einige hundert
KByte an RAM bentigt, je nach TOS-Version.

ROMSPEED ist Freeware und darf zusammen mit diesem Text weitergegeben werden.

     Uwe Seimet, Januar 1994

-----

And now some words for all English speaking Atari users:


     How to use ROMSPEED V3.1

On the TT and Falcon030 the MC68030 can access RAM faster than ROM. After
copying all ROM contents into RAM and reprogramming the 68030 PMMU the
processor will access RAM instead of ROM. This means a speed gain of up to 30%
on a TT with Fast RAM and of about 5% on a Falcon030. TTs without Fast RAM
won't profit from ROMSPEED.

These numbers don't mean the all programs running while ROMSPEED is resident
will speed up this much. A gain of speed can only be observed during system
calls, i.e. when the 68030 is working within GEMDOS, BIOS, XBIOS, VDI or AES.
If you use software that replaces parts of these operating system structures
(e.g. NVDI) your machine won't be that much faster. When using Mag!X the use
of ROMSPEED doesn't make any sense because the whole Mag!X operating system
is located completely in RAM right from the start. A similar situation can
be found with MultiTOS.

Those working with WINX don't need GEMRAM anymore when using ROMSPEED. WINX
recognizes the presence of ROMSPEED and will patch the operating system
copy created by ROMSPEED. For that purpose ROMSPEED has to be started before
WINX, of course.

Normally (but not necessarily) ROMSPEED is started from within the AUTO
folder. Keep in mind that ROMSPEED requires several hundred KByte of RAM,
depending on the TOS version.

ROMSPEED is Freeware, it may be distributed as long as this text is included.

     Uwe Seimet, January 1994
