=========================================================================
 
INFO-ATARI16 Digest         Mon, 12 Feb 90       Volume 90 : Issue  189
 
Today's Topics:
                     ALADIN MAC EMULATOR (2 msgs)
             Cad 3D II Metafiles to Easydraw or Timeworks
                                MemMap
                  NEWBELL.PRG and the Phantom Typist
  New Panarthea address (Was: PANARTHEA ADDRESS DIFFICULTIES (NEW?))
                  PageStream 1.8 virus (not a rumor)
                     Some Atari dealers in Canada
                          STE and multisyncs
                          Tape Drive Backup
                      vote on comp.periphs.scsi
                      Wordperfect newer release
----------------------------------------------------------------------
 
Date: Mon, 12 Feb 90 22:49:51 SST
From: "S. Sujarittanonta" <AKISUJAR%NUSVM.BITNET@CUNYVM.CUNY.EDU>
Subject: ALADIN MAC EMULATOR
 
I am looking for an Aladin Macintosh Emulator with Software Version 3.0 and
also the Aladin Exchanger Cartridge.  Anyone planning to get the Spectre GCR
and want to get rid of the Aladin, kindly e-mail your offer and the price you
want to sell to me please.
                                 S. Sujarittanonta
                                 School of Architecture
                                 National University of Singapore
 
------------------------------
 
Date: Mon, 12 Feb 90 22:49:51 SST
From: "S. Sujarittanonta" <AKISUJAR%NUSVM.BITNET@CUNYVM.CUNY.EDU>
Subject: ALADIN MAC EMULATOR
 
I am looking for an Aladin Macintosh Emulator with Software Version 3.0 and
also the Aladin Exchanger Cartridge.  Anyone planning to get the Spectre GCR
and want to get rid of the Aladin, kindly e-mail your offer and the price you
want to sell to me please.
                                 S. Sujarittanonta
                                 School of Architecture
                                 National University of Singapore
 
------------------------------
 
Date: 12 Feb 90 12:37:38 GMT
From: mcsun!ukc!axion!galadriel!robing@uunet.uu.net  (Robin Gape)
Subject: Cad 3D II Metafiles to Easydraw or Timeworks
Message-ID: <574@galadriel.bt.co.uk>
 
From article <1890.25d5ee94@cc.helsinki.fi>, by jalkio@cc.helsinki.fi:
> I have printed Metafiles with the Cad 3D II Hardcopy-program. I haven't
> been able to load these files to Easydraw or Timeworks, even if they use
> Metafiles, too. What's the reason for this?
 
Jalkio, (and others!)
 
the answer is to use version 2.3 of EasyDraw which can import CAD 3D
metafiles with ease, though you will find that shading is changed to a
uniform tone of grey.
 
If you don't have 2.3 you should upgrade through your distributor or
Migraph themselves. Migraph can supply a version 3 to owners who are
registered directly with Migraph.
 
Good luck
 
(I have no commercial connection with Migraph)
 
Robin
 
R.A.Gape
 
robing@uk.co.bt.galadriel
 
------------------------------
 
Date: 12 Feb 90 10:06:11 GMT
From: agate!darkstar!ucscb.UCSC.EDU!rome@apple.com
Subject: MemMap
Message-ID: <1217@darkstar.ucsc.edu>
 
I find myself in a situation where I would like to know where all my
memory is being used up.  Does anyone out there have a utility which
will display the program name and how much/which RAM it is using?
Thanks.
 
          Roman Baker
          rome@ucscb.UCSC.EDU
 
------------------------------
 
Date: Mon, 12 Feb 90 09:50:40 EST
From: Robert McCoy <CS31217%UTCVM.BITNET@CORNELLC.cit.cornell.edu>
Subject: NEWBELL.PRG and the Phantom Typist
 
This Newbell program...I'd been thinking of writing one myself but like so
many of the ideas in my head, had not found the time for it.  Is this
program PD?  If so, can it be sent to me?  If not, where may I get it?
And also, since I am quite new to BITNET, USENET and the whole works,
can someone explain what the Binaries and and how I should get to them?
 
                                 -Robert McCoy
                                 -CS31217@UTCVM (bitnet)
 
------------------------------
 
Date: 12 Feb 90 13:51:03 GMT
From: maytag!water!ljdickey@iuvax.cs.indiana.edu  (L.J.Dickey)
Subject: New Panarthea address (Was: PANARTHEA ADDRESS DIFFICULTIES (NEW?))
Message-ID: <2978@water.waterloo.edu>
 
In article <900204.15173008.021770@SFA.CP6> Z4648252@SFAUSTIN.BITNET (Z4648252)
 writes:
>
>    For the past few months I've been successfully getting files from
>ARCHIVE-SERVER%PANARTHEA%CHROME@Sun.COM.  Now I'm getting the following
>message "From: Mailer-Daemon@Sun.COM (Mail Delivery Subsystem)
>         Subject: Returned mail: Host unknown"
>
>    Duh....  Ok, what have I done wrong THIS TIME?
>
 
I had a similar problem, using a slightly different address.  I have used
this one since, with complete success.
 
        archive-server%panarthea.ebay@sun.com
 
--
    L. J. Dickey, Faculty of Mathematics, University of Waterloo.
        ljdickey@water.UWaterloo.ca     ljdickey@water.BITNET
        ljdickey@water.UUCP             ..!uunet!watmath!water!ljdickey
        ljdickey@water.waterloo.edu
 
------------------------------
 
Date: 12 Feb 90 17:52:38 GMT
From: brunix!rjd@uunet.uu.net  (Rob Demillo)
Subject: PageStream 1.8 virus (not a rumor)
Message-ID: <28923@brunix.UUCP>
 
If this has been brought up before, I apologize, but...
 
There was a virus contained in the first 100 to 150 disks
of the $10 upgrade to Pagestrem 1.8. (If you purchased the
$25.00 upgrade, this does not pertain to you.)
 
This is directly from the horse's mouth, as it were...the statement
was issued by SoftLogik, Inc. to the ST Report. It the statement it
is refered to as the "key virus." (Anyone hear of this?) Any of the
anti-virus programs should take care of it, but Soft Logik is,
of course, exchanging disks if you are nervous.
 
Please contact Soft Logik, as I have no further information beyond
that.
 
 - Rob DeMillo                  | Internet: rjd@brown.cs.edu
   Brown University             | BITnet: DEMILLO%BRNPSG.SPAN@STAR.STANFORD.EDU
   Planetary Science Group      | Reality: 401-273-0804 (home)
"I say you *are* the Messiah, Lord! And I ought to know, I've followed a few!"
 
------------------------------
 
Date: 12 Feb 90 13:59:33 GMT
From: maytag!water!ljdickey@iuvax.cs.indiana.edu  (L.J.Dickey)
Subject: Some Atari dealers in Canada
Message-ID: <2979@water.waterloo.edu>
 
In article <4894.25cc85ac@uwovax.uwo.ca> 35002_3025@uwovax.uwo.ca writes:
>In article <25CC88FC.14033@maccs.dcss.mcmaster.ca>,
 johns@maccs.dcss.mcmaster.ca (Conan the Barbarian) writes:
>>      Someone asked for a list of Atari dealers in Canada.
 
OK, here in Kitchener-Waterloo, there is
 
        Whats This? Inc
        103 Queen Street South
        Kitchener, Ontario  N2G 1W1
        1-(519)-744-6211
 
 
--
    L. J. Dickey, Faculty of Mathematics, University of Waterloo.
        ljdickey@water.UWaterloo.ca     ljdickey@water.BITNET
        ljdickey@water.UUCP             ..!uunet!watmath!water!ljdickey
        ljdickey@water.waterloo.edu
 
------------------------------
 
Date: Mon, 12 Feb 90 11:05:00 EST
From: Greg Csullog <01659%AECLCR.bitnet@ugw.utcs.utoronto.ca>
Subject: STE and multisyncs
Message-ID: <90Feb12.110724est.58178@ugw.utcs.utoronto.ca>
 
I ask ONCE AGAIN. If the STE supports large screen monitors, like the
MONITERMs, can I get the full rez (1024x768) on an OMNIMON Rainbow
multisync. If so, HOW!!!!!
 
Can someone from Atari PLEASE, PLEASE answer this question?
 
Can someone from Atari also post the specs on the SIMMs the STE and STACY
are supposed to use?
 
------------------------------
 
Date: 12 Feb 90 06:52:10 GMT
From: tornado.Berkeley.EDU!kawakami@ucbvax.Berkeley.EDU  (John Kawakami)
Subject: Tape Drive Backup
Message-ID: <34247@ucbvax.BERKELEY.EDU>
 
I understand that used workstation equipment (like tape drives) are
pretty cheap and easy to get.  I imagine that a tape drive would
be easy to find on the used workstation market.
 
I don't know anything about such dealers.  Could someone give me
pointers, or pointers to pointers.
 
John Kawakami       kawakami@earthquake.berkeley.edu
                    ucbvax!earthquake.berkeley.edu!kawakami
                    take-a-right-up-the-hill-then-a-left-on-leroy
 
------------------------------
 
Date: 12 Feb 90 17:01:08 GMT
From:
 snorkelwacker!usc!zaphod.mps.ohio-state.edu!math.lsa.umich.edu!emv@bloom-beacon
 .mit.edu  (Edward Vielmetti)
Subject: vote on comp.periphs.scsi
Message-ID: <EMV.90Feb12120108@duby.math.lsa.umich.edu>
 
I put forth the idea of comp.periphs.scsi about a month ago on
comp.periphs and a few other groups.  Reaction to the idea was almost
entirely positive, reaction to the name was pretty good.  The call for
votes went out to news.announce.newgroups on Feb 9; this means if
the vote passed the group will be created early March.
 
The idea of a comp.periphs.scsi is to collect all of the hard-won
information about various SCSI peripherals that's uniform across
all platforms.  I anticipate a fair amount of cross-posting into
this group from the comp.sys.*.hardware groups.
 
Please mail votes to
        To: emv@math.lsa.umich.edu
with the header
        Subject: YES vote on comp.periphs.scsi
or      Subject: NO vote on comp.periphs.scsi
 
I'll collect these, tabluate them, and let you know what the
result is through news.announce.newgroups.
 
Please redirect followups to comp.periphs for substantive SCSI
discussion, news.groups for formal or procedural issues.
 
--Ed
Edward Vielmetti, U of Michigan math dept
 
------------------------------
 
Date: 12 Feb 90 10:14:00 GMT
From:
 cs.utexas.edu!jarvis.csri.toronto.edu!torsqnt!tmsoft!masnet!canremote!derek.lin
 field@tut.cis.ohio-state.edu  (DEREK LINFIELD)
Subject: Wordperfect newer release
Message-ID: <90021206214250@masnet.uucp>
 
I received the August 18, 1989 release a couple of weeks ago. I assumed
it was the last release. If you find out anything different, please let
me know.
 
BTW, have you checked for crosslinked files while using Wordperfect. We
used Wordperfect on IBM where I use to work and we always had problems
with cross linked files. Now these problems are appearing on my HD. I've
had duplicte directories appear within the directory that I keep my  Text
files; I've also had directories corrupted so that I could return to the
parent directory from the desktop but not within a disk utility program
like DLII.
---
 ? Via ProDoor 3.2aR
 ? QNet 2.03: The Crystal Palace * NorthAmeriNet * Toronto (416) 925-5742 *
 
------------------------------
 
End of INFO-ATARI16 Digest V90 Issue #189
*****************************************
