
***** GEMvelope 2.96 *****

 Finally, quick and easy printing of envelopes on your printer! 
 GEMvelope allows you to print envelopes on almost any printer. 
Laser (and most other) printers will not feed an envelope so that 
you may print across it. GEMvelope solves this problem allowing you 
to print even legal size envelopes on virtually all laser printers 
and dot matrix printers. GEMvelope was developed to work hand in 
hand with most word processors and databases to provide a complete 
solution. 
 GEMvelope Features:

 * Import allows extracting an address from a letter in almost any 
work processor format (or from the GEM/Atari clipboard). 
 * Mail merge/browse allows printing one or many envelopes with an 
address imported from a database file such as CardFile by Gribnif 
Software.
 * Adjustable positioning for different size envelopes. 
 * Load-able and save-able addresses and configurations. 
 * POSTNET bar code printing for speeding your mail. (Will also 
save two cents per letter on the future according to the United 
States Post Office).

 * A desk accessory version ideal for using from within program 
like Tracker/ST.

 * GEMvelope uses GDOS and includes FontGDOS with drivers for the 
following printers: Atari SLM804/605, HP Laserjet compatibles, HP 
DeskJet, Epson FX80/LX compatible 9 pin, Epson/Panasonic compatible 
24 pin, NX1000, Okimate 20.

 * Includes Swiss, Dutch, and Typewriter fonts. Fully compatible 
with scalable and bit-mapped GDOS fonts.

 * Compatible with all Atari ST(e)/Mega ST(e)/TT/Falcon030 
computers with 1 megabyte of RAM. Atari SLM laser printers require 
2 megabytes of RAM.

 
=================================================================== 
Purchasing and Upgrade information:

 New owners: $30.00 plus $3.00 shipping and handling. 
 CardFile 4 owners: $20.00 plus $3.00 shipping and handling. Please 
send original CardFile 4 disk. The disk will be returned with your 
GEMvelope package.

 From previous versions: $5.00 plus $1.00 shipping and handling. 
This includes versions by Synergy Software. Please include your 
original disk. If you would like a printed manual add $5.00 plus 
$2.00 shipping and handling. 
 
=================================================================== 
BRiSK Software
 8702 Switzer Road
 Overland Park, KS 66214-1924 
 (913) 541-0311 phone/fax

 Internet Email: cysco@tyrell.net -or- J.KRZYSZTOW@genie.com GEnie 
Email: J.KRZYSZTOW
 World Wide Web: http://www.tyrell.net/~cysco/brisk.htm 
 (C) 1996 BRiSK Software

 
=================================================================== 
List of new features and problems corrected in GEMvelope 2.96 
 1) Under Geneva, it is now possible to get to the other windows as 
well as GEMvelope's menu.

 2) When pasting from the clipboard, if the last line doesn't end 
with the carriage-return line-feed sequence, the last character 
will no longer be entered twice.

 3) Can now be setup with the Install Application feature of most 
Desktops (including Atari's built-in Desktops). The extension to 
use for the desktop should be GLP. Please consult your user manual 
for the Desktop you are using for instructions on how to Install 
Application.

 4) With Cursor to Address selected, the cursor will go to the 
first line of the address instead of the Return Address. This 
feature is saved into the GLP file, so you must load, set the 
option, and save any GEMvelope GLP you wish this option to be 
enabled for. 
 5) Added a Clear button to clear the the address or the return 
address. If the cursor is in the return address, it is cleared, and 
the cursor goes to the first line of the return address. If the 
cursor is in the address, it is cleared, and the cursor goes to the 
first line of the address.

 6) When deselecting Print Return Address, if the cursor is in the 
return address it will be moved to the first line of the address. 
If the cursor is already in the address, it will not move. 
 7) Changed all the arrows used to change the various offsets to 
either a plus or a minus, depending on whether the value will 
increment (+) or decrement (-).

 8) Added a communication protocol for other programs to 
communicate with GEMvelope. This has been added to Gribnif's 
CardFile as of version 4.08.

 9) When pasting, GEMvelope will paste in the return address, if 
the cursor is in the return address, or it will paste in the 
address, if the cursor is in the address.

 10) All menu items under Edit are now functional.

 Copy will copy either the return address or the address based on 
the cursor position, to the clipboard. This makes it possible to 
get addresses out of GEMvelope.

 Cut will copy either the return address or the address based on 
the cursor position, to the clipboard. This makes it possible to 
get addresses out of GEMvelope. Then, whatever was copied to the 
clipboard will be cleared and the cursor will be placed on the 
first line.

 Paste will paste in the return address if the cursor is in the 
return address or it will paste in the address if the cursor is in 
the address. This works like the Paste button.

 Delete will clear the address or the return address. If the cursor 
is in the return address, it is cleared, and the cursor goes to the 
first line of the return address. If the cursor is in the address, 
it is cleared, and the cursor goes to the first line of the 
address. This works like the Clear button.

 
=================================================================== 
TRADEMARKS: ATARI ST, MEGA, STE, TT, and TOS are trademarks of 
registered trademarks of Atari Corporation. 
 GEM and GEM Desktop are trademarks of registered trademarks of 
Digital Research Inc.

 All other brand and product names mentioned are trademarks of 
their respective holders and are acknowledged.

