How to use the RiPlayer :
-------------------------

First of all, you may start the Riplayer as ACC or PRG.
If you started him, the selection menu appears.
By clicking on one of the upperst two very large buttons
you may select different replay- routines. Now you
select your replay- routine. Then you press on the "LOAD"
button and load the file. By pressing on "PLAY" the tune
will be played.

There are 4 more buttons signed "VBI","50HZ","100HZ","200HZ".
With those 4 buttons you may chose between the vertical blanc
or different timer speeds. If you have a VGA screen, the chip
tunes are played too fast, 60 times per second and not 50 times
per second. So you change to "50HZ" and the speed will be 
correct. The "100HZ" button is useful when you wish to play
so called 2 frames tunes from the megatizer or any other chip
tracker wich allows more than 50 calls per second.

If your tune is an older chiptune, it is possible that there are
more different tunes in one file. To choose between the different
tunes you only press the '<' or '>' button. 
CAUTION ! It's not possible for us, to check if there is really
another tune ! If there's only one tune in that file and you 
switch on tune 2, the computer may crash ! So better check this
out before you code an excellent demo and while coding you change
to tune 2 and your system crashes and you demo will be anywhere !
(where the sun never reaches)

If you want to replay bigger modules you have to ensure enough
buffer to load that module. You may choose the buffer length
in the "Preferences" menu by pressing the "PREFS" button.
Here you may also regulate the volume for mods,chiptunes and
the multiplexer - connections.

Okay, that's all. For troubleshooting or ideas contact me under :

                      Jean-Pierre Putzolu
                         Ohmstrae 10
                        72555 Metzingen

PS : Also full functionable under Multitos.