
                      ST REPORT WEEKLY ONLINE MAGAZINE
                            Monday, July 11, 1988
                               Vol II  No. 43
                                ===========

            APEInc., P.O.  BOX 74,  Middlesex, N.J.  08846-0074

  PUBLISHER                                              MANAGING EDITOR
  Ron Kovacs                                               R.F.Mariano

          =======================================================

                     ST REPORT EDITOR: Thomas Rex Reade

                  PO Box 6672 Jacksonville, Florida. 32236

                        Headquarters Bulletin Boards

 ST Report North             ST Report Central           ST Report South
  201-968-8148                 216-784-0574                904-786-4176

                   ------------------------------------
                                CONTENTS
                                ========
> From the Editor's Desk..............> ST REPORT ART CONTEST RULES.......
> ARC SHELL DOCS......................> ABOUT #41 & #42...................
> GFA Basics..........................> CHIP-RIP/DRAM-SCAM................
> ST REPORT CONFIDENTIAL..............> The ST Book.......................

=========================================================================
EXCLUSIVELY ON:       COMP-U-SERVE    ~    GENIE    ~    DELPHI
=========================================================================

From the Editor's Desk:

Atari is headed in the right direction, of this you can be sure.  The only
thing that is disturbing is how or what will impede Atari's progress?  
The factors presented here can make or break the momentum Mr. Ligouri has
developed.  The time has come for Atari to take hard stands on a number
of issues, none of which are inconsequential.

  The first would be to take the entire market into play, do not allow the
concept of, Blue Ribbon product to be sold by Blue Ribbon dealers
only, allowing selective discrimination to overrule good marketing 
principles and folks who are eager to not only sell Atari Products but to
service them as well.  Take the mystery out of service by adapting the 
total modular replacement technique.  Be original, don't try to copy the
Apple "caste system" as far as marketing is concerned.

  The second is to set the direction of promotion and do not deviate with
hair brained schemes and disastrous distractions brought forward by those
eager to make a name for themselves at Atari's expense.  Permit a new
customer to choose the method of instruction in the operation of his new
machine by, of course the owner's manual, sending in a coupon that will
have Atari send him a set of detailed instructions on cassette tape
(either video or audio) and a book to go along with the tape.  Do not be
so presumptuous to think that all potential computer users have a VCR. 
That could easily be seen as an additional expense (hidden) to owning a
CPU.  National Advertising must be the first and foremost approach done to
make the population realize that Atari is NOT out of business. (We have
received a number of notes and calls telling us about the unscrupulous
salespeople in the major dep't. stores and computer outlets who are 
telling folks, "ATARI IS OUT OF THE COMPUTER BUSINESS"!

  The third is to make sure Atari NEVER AGAIN experiences the shoot the
foot routine by allowing poorly prepared press releases that are highly
opinionated and wishful thinking on the part of the person(s) doing the
release.  Allow ONLY prepared, bullet proof statements that are totally
positive and true.

  After having taken an informal poll through roughly 65 private BBS 
systems around the country, 70% of the home computer purchasing public are
NOT aware of the ST line or it's potential, those who are found out via a
usergroup or user!  Advertising in the magazines that are specific to 
Atari is nice only if you are releasing a new add-on product or 
peripheral.  As far as new customers and users go, those ads belong in 
the "magazines for the masses".

           REACH THOSE WHO DO NOT KNOW OF THE ATARI ST COMPUTER!  

  Nobody wants to see this computer give the so called high end computers
a real run for the money more than I do, I am sick and tired of hearing, 
"Why don't you get a real computer?"....I know my ST4 will blow away any 
of the popular BIG three out there for the home and general public market.
The Atari ST can run their software easily.  They need to learn from the
Atari but, they first have to find out it exists.

                                          Rex.......


--------------------------------------------------------------------------


                           THE JUDGES LIST
                           ===============
         Service                                    Name
         -------                                ------------
           CIS                                    Ron Luks
           CIS                                    Dan Rhea
           CIS                                    Mike Schoenbach
           GEnie                                  Darlah Hudson
           GEnie                                  Fred Beckman
           GEnie                                  Sandy Wilson

--------------------------------------------------------------------------

ST-Report Official Contest Rules 
================================ 

No purchase necessary.

Deadline for consideration in this contest is midnight August 31, 1988.

Winners will be announced in ST-Report on September 12, 1988.  We 
guarantee to award all prizes. The prize list will be announced during
the contest.

All readers are eligible to enter except employees of APEInc. 
Publishing, CompuServe, GEnie, Delphi and their immediate families.

This contest void where prohibited or restricted by law.  We are not
responsible for lost, mis-marked, or delayed art/work.

All submissions must be drawn with any Atari ST drawing program.

All submissions must be drawn by the original artist. Copyrighted art work
will not be accepted.

All submissions become the property of APEInc.

All submissions must be uploaded to specified BBS systems by the deadline
date. All systems have time and date stamping capability. Any entry dated
after 8/31/88 will be void from the contest.

Art Work Requirements 
--------------------- 

All art work considered for this contest must be drawn with any Atari ST
drawing program.

Any person submitting art work must leave an address, telephone number,
and drawing program used. 

Artwork must contain the following:

ST-REPORT

The winning entry will be used at a later date for a newsletter or
magazine cover.

Where to Send 
------------- 

         All art work may be uploaded to the following systems.

                    Syndicate BBS   (201) 968-8148
                    Bounty ST BBS   (904) 786-4176

Entries by mail are also permitted.  Be sure to use a 3.5 floppy S/S!
You may send to: 

                        ST-Report Logo Contest
                          Post Office Box 74
                    Middlesex, New Jersey 08846-0074

  (Please include your name, address and telephone number)

Updates
-------

This contest will update uploading areas every two weeks.  Contest rules
will not be changed, but judges may be added during the run of the
contest.

Current judge listing will be published next week.

This contest commences May 2, 1988 and will end Midnight August 31, 1988.

If you have any questions, Please leave email on the services at the
following addresses:

                CompuServe:   71777,2140
                GEnie     :   ST-REPORT
                          :   R.KOVACS
                DELPHI    :   RONKOVACS
                The Source:   BDG793

Rules and Regulations:

1).  Use any full color program written exclusively for the ST to draw
     your own personal design of an ST-Report logo. 

2).  Art work ported over from any other computer is void.

3).  No X-rated art work will be accepted.

4).  Winners will be announced by mail, email, phone call or equivalent
     on or before September 12, 1988.

5). Judges decisions are final.



 ************************************************************************


                    :HOW TO GET YOUR OWN GENIE ACCOUNT:
                     ---------------------------------

       To sign up for GEnie service: Call: (with modem) 800-638-8369.

               Upon connection type HHH (RETURN after that).  
                          Wait for the U#= prompt.  
                    Type XJM11877,GEnie and hit RETURN.  
             The system will prompt you for your information.


 ************************************************************************



                    ARC Shell Documentation Version 1.96
                    ====================================

By Charles F. Johnson

                        Last revision: July 4, 1988


Part One - Introduction:

     ARC Shell is a GEM program which is designed to work with the 
popular ST archiving utility ARC.TTP.  Essentially, ARC Shell adds a GEM 
interface to the ARC program, letting you point and click to select the 
various options instead of typing a command line.  (I don't know about 
you, but one of the main reasons I bought an ST was to get away from all 
that MS-DOS/Unix command line silliness.)

     ARC Shell also contains a complete GEM-based disk utilities package,
that lets you copy files (with wildcards and with query), delete and 
rename files, create and delete folders, show the free space on any 
connected drive, and even run other programs...all without exiting to the
desktop.  ARC Shell's current configuration can be saved at any point, so
that the options and settings you use most often will be selected when you
run the program.  In addition, you can use the ST desktop's "Install 
Application" feature to set things up so that ARC Shell will automatically
run when you double-click on a file with an extension of ARC.

     This documentation will focus primarily on the operation of ARC 
Shell; it's not intended to teach you how to use ARC. However, I've 
included the manual for version 5.20 of ARC in the archive which contains
this file and the latest version of ARC Shell.  Refer to this manual if 
you have any questions about the ARC program itself, such as "What's the 
difference between Updating and Freshening?" or "What does Convert 
Archive do?"  The original version of ARC for the ST was version 5.12, 
ported by Harvey Johnson.  The most recent version is ARC 5.21, ported to
the ST by Howard Chu.  Version 5.21 is available on Compuserve, Delphi, 
and GEnie, and on many local ST BBSes.


Part Two - The usual shareware plea

     Versions 1.95 and above of ARC Shell are "shareware," which
     means that if you like and use my program I'd appreciate a
     contribution of $15.00 ... or more if you happen to be struck by
     a random philanthropic impulse.  I've been continually updating
     and improving ARC Shell since it was first written, and I think
     you'll be pleased with the result; letters with checks in them
     would please me equally!  If you think ARC Shell is worth at
     least $15.00, send a check to:

                         Charles F. Johnson (ARC Shell)
                                  P.O. Box 1250
                          Pacific Palisades, CA 90272

                       And...... thanks for your support!


Part Three - Using ARC Shell

     When you run ARC Shell, make sure you have the ARC program (ARC.TTP)
in the same directory with ARCSH196.PRG.  The very first thing ARC Shell 
does is look in the current directory for ARC.TTP.  If a file with this 
name cannot be found, ARC Shell will show you a file selector asking, 
"Where is ARC.TTP?"  and you will be able to locate the ARC program with 
the file selector.  When ARC Shell finds the ARC program, it will then 
display a large dialog box, with buttons representing the available 
options.

                         What you're looking at.

     In the upper left of the main dialog box is a box containing buttons
labeled "ADD to Archive", "EXTRACT from Arc", etc.  The buttons in this 
box are the main ARC commands; you'll notice that the default ARC command
is "EXTRACT from Arc".  Only one of these buttons can be selected at a 
time - if you click on a button to select it, the previously selected 
button will be turned "off".  (These are known as "radio buttons.")

     To the right of the ARC command box is a box containing the ARC 
"flags."  The button labeled "Hold Screen" is selected by default when 
you first run ARC Shell.  The buttons in this box can be turned off and 
on individually; unlike radio buttons, more than one can be selected at a
time.  The button labeled "Encrypt/Decrypt" is a special case; when you 
turn this button on, the code word entry line beneath it becomes active 
and the edit cursor (the thin vertical line) is placed on the entry line,
allowing you to type in an encryption keyword.  The code word can be up 
to eight characters long.

     Directly underneath the ARC command box is a box containing buttons 
to let you select the device which will be used for LIST and VERBOSE LIST
commands, and the drive for ARC and DATA files. The drive buttons can be 
operated in two ways; you can either type in the drive letter by hand, 
using the up and down arrows to move from one button to another, or use 
the mouse to click on the button.  If you click the button, a box with 16
buttons representing the 16 possible logical drives will pop up, allowing
you to select the drive with the mouse.  Only active drives will be 
selectable in this box, and hitting Return will exit without changing the
current drive.

     Finally, along the bottom of the main box are buttons labeled "Info",
"ARC", "Disk", "Config", and "Exit".  The Info button will display a 
copyright message, and a gentle reminder to send in your shareware 
contribution.

                     OK, let's do something.

     When you've set all the options in the ARC Shell dialog box the way 
you want them, click on the "ARC" button to start things going.  NOTE: 
You may also double-click on any of the buttons in the ARC command box 
(Extract, Add, List, etc.) to execute that command immediately without 
the extra step of clicking the "ARC" button.

     Depending on which ARC command you've selected, what happens next 
will vary slightly.  In all cases however, the first thing ARC Shell will
do is display a file selector to allow you to choose an ARC file.  If 
you're creating a new archive file with the ADD or MOVE commands, simply 
type in a name for the new file on the file selector's "Selection" line, 
and hit Return or click on OK.  If you're using any of the other commands
(which all operate on previously-created archive files), click on the name
of the ARC file you're working with and click OK.  The file selector's 
"Cancel" button always returns you to the main ARC Shell dialog box.

     The LIST, VERBOSE LIST, or TEST commands only take one parameter - 
the name of an ARC file - so they will be acted upon as soon as you exit 
the file selector.  Any of the other commands will now require a second 
parameter, the name of the DATA files on which you're operating.

     If you're ADDing files to an archive and you leave the "Selection" 
line in the DATA file selector blank, ARC Shell interprets this as "all 
files", and passes a search spec of *.* to the ARC program.  If you type 
in a name on the selection line or click on a filename, only that 
filename will be passed to ARC.  Also, when ADDing files, you will always
return to the DATA file selector when ARC is finished adding a file or 
files, so that you can choose more files to add without having to select 
"ADD to Archive" every time.  You must click on the file selector's 
"Cancel" button to exit back to the main dialog box.

     If you leave the "Selection" line blank when you're EXTRACTing files
from an archive, you'll be faced with the following choices about how to 
extract the files:

           ALL - Extracts all files from the archive into the
           specified directory.

           To Folder - First creates a folder (a subdirectory)
           with the same name as the archive file (minus the .ARC
           extension) in the specified directory, then extracts all
           files from the archive into the folder.  When the
           operation is complete, you'll be given the chance to
           delete the original ARC file.

           W/ Query - Reads the names of the files in the archive
           one at a time, and prompts you whether to extract each
           one.

           Cancel - Lets you change your mind and return to the
           main ARC Shell dialog box.

    The "COPY to StdOut" command can be used to view text files contained
within an archive without extracting them first.  When this command is 
selected, ARC Shell will display an alert box with the choices "ALL" and 
"w/ Query".  The Query option works in the same way as with the EXTRACT 
command; the filenames will be read from the archive one at a time, and 
you can choose whether to view each one in turn.  When you use "COPY to 
StdOut" to view text files, you can pause the scrolling by typing 
Control-S and resume by typing Control-Q.  The COPY operation can also be
aborted at any time by typing Control-C.

     The LIST and VERBOSE LIST commands are used to display the files 
contained within an archive.  You can direct the output from the LIST 
commands to the screen, to the printer, or to an ASCII disk file by 
clicking on the buttons labeled "List Device" in the main ARC Shell 
dialog box.

     There are two buttons in the ARC Shell dialog box which are intended
to be used only with ARC version 5.21; "Overwrite Existing Files" and 
"Squash".  Earlier versions of ARC will report an error if either of 
these two buttons are selected.  The buttons labeled "Crunch" and "Squash"
are used to choose between two different types of data compression schemes
used by ARC 5.21 -- only the "Crunch" option is supported by earlier 
versions.  So bear in mind that if you use the "Squash" method, people who
don't have ARC 5.21 will be unable to extract those files.


Part Four - The ARC Shell Disk Utilities

     To access the ARC Shell Disk Utilities, click on the button labeled 
"Disk" at the bottom of the main ARC Shell dialog box.  The Disk Utilities
are a complete GEM-based file maintenance system - you won't have to exit
ARC Shell to copy files, delete, etc.  You can even use the ARC Shell
Disk Utilities to run other programs.

     When you click on the "Copy File(s)" button, a file selector appears
to let you choose the source file(s) for the copy.  You can use any 
combination of wildcards (? and *) on the 'Selection' line of the file 
selector to specify groups of files to be copied.  When you click the 
file selector's OK button, another file selector will appear to let you 
choose the destination directory for the copied file(s).  If the source 
filename contains no wildcards (in other words, you're copying a single
file) the file will be copied right away.  If there are wildcard 
characters in the source filename, you'll be given a choice to copy "ALL"
files or copy "w/ Query".  The Query option will prompt you whether or 
not to copy each file that matches the wildcard specification.  You can 
also delete groups of files by using wildcards in the same way.

     If the destination filename already exists when a copy operation is
being performed, a box will appear with the warning "Name Conflict During
Copy".  You can either click OK to write over the existing file or type in
a new name for the copied file and hit Return.

     The "Run Program" command lets you execute a program from
within ARC Shell, and return to ARC Shell when the program
terminates.  If the program you choose to run has the extension
.TTP (Tos Takes Parameters), a box will appear to let you enter a
command line to pass to the program.

     The operation of the other disk commands should be fairly self
explanatory.  You can rename files, show the free space remaining on a 
disk, create and delete folders, and format a floppy disk.  The format 
command lets you use drive A or B, and formats either single or double 
sided.  No fancy format options here - you get the straight ahead standard
format, 80 tracks, 9 sectors per track.

     At the bottom left of the Disk Utilities dialog is a box titled 
"Copy/Delete Prompts" containing buttons labeled "On" and "Off".  When 
this option is set to "Off", you'll get no warning when you delete a file
or copy a file to an already existing name.

       The Exit button returns you to the main ARC Shell dialog box.


Part Five - Configuring ARC Shell

     Clicking on the button labeled "Config" at the bottom of the ARC 
Shell dialog box will take you to the configuration screen.   This screen
lets you specify a pathname for both a "default" ARC utility and an 
"alternate" ARC utility, and also set the directory to which ARC's 
numerous temporary files will be written (the latter option is only valid
when ARC Shell is used with ARC 5.21).  You can save these options, as 
well as every other ARC Shell setting, with the button labeled "Save 
Configuration"; after you do this, ARC Shell will remember the settings 
the next time you run it.  

     The default ARC utility is the one which will be searched for when 
the program first runs.  If you haven't specified a default ARC utility, 
ARC Shell looks in the current directory for a file named ARC.TTP (see 
above).  However, using the Config option, you can set it so that ARC.TTP
 can be located anywhere when you run ARC Shell.  Click on the button 
labeled "Locate Default ARC Program" and use the file selector to specify
a new file and pathname.

     Next, you can select an alternate ARC utility which can be enabled 
by clicking on the button labeled "Use Alternate".  To specify the 
pathname for the alternate ARC utility, click on the button labeled 
"Locate Alternate ARC Program" and use the file selector.  The purpose of
the "Alternate" option is to allow you to switch easily between two 
different ARC programs; for example, some people prefer to use a 
shareware program called DCOPY (by Ralph Walden) to do their ARC 
operations because it's quite a bit faster than ARC.TTP.

     When ARC is adding files to an archive, it creates quite a few 
temporary work files on the disk.  With ARC Shell, you can choose to have
these files written to either the ARC drive or the DATA drive, or to 
another directory altogether.  (Hint:  directing the temporary files to 
a RAMdisk can really speed up ARC, especially if you have a floppy-based 
system.)  When you click on the button labeled "Set Directory" a file 
selector lets you choose the directory for the temporary files.  (NOTE: 
this option is only valid when used with ARC 5.21.)

     There is one small difference in the way the two versions of ST ARC 
handle redirection to the printer.  ARC 5.12 uses the device name "PRT:" 
while ARC 5.21 uses "PRN:".  If you're going to be redirecting the output
from the LIST commands to a printer, you should choose the appropriate 
"Printer Device Name" at the lower left of the Configuration box.

     When you have ARC Shell set up the way you want it (including all of
the options in the main dialog box), you can click on the "Save 
Configuration" button to make this arrangement your new default....in 
other words, after saving your configuration, ARC Shell will always start
out with your settings when you run it.

     Versions of ARC Shell prior to 1.96 saved their configuration data 
in a separate file called ARCSHELL.CNF.  This has changed in version 1.96;
the configuration is now saved directly into the ARC Shell program file, 
which makes a separate data file unnecessary.  When you choose to "Save 
Configuration", ARC Shell will first look in the directory from which it 
ran for a file called ARCSH196.PRG.  If a file by this name is found, ARC
Shell will attempt to write the new configuration data to this file.  If 
for some reason, a file by this name exists and is NOT the ARC Shell 
program, you will be warned and the configuration save can be retried or 
aborted.  If ARC Shell cannot find a file named ARCSH196.PRG (perhaps you
changed the name?), you'll be given a chance to use a file selector to 
locate the program file no matter which name you've given it.

Part Six - Installing ARC Shell as an Application

     Using the desktop's "Install Application" feature, you can set things
up so that whenever you double-click on a file with the extension .ARC, 
ARC Shell will automatically load and run.  To do this from the desktop, 
click once on ARCSH196.PRG to select it, then move to the "Options" menu 
and select "Install Application".  In the box that appears, enter a 
document type of "ARC", and then click on the button labeled "Install".  
(DON'T hit Return after entering the document type....Return will exit
without installing!)  Now save your desktop, so this setting will be 
remembered the next time you boot up.

     If you double-click on an ARC file after ARC Shell has been 
"installed" in this way, an alert box will appear showing the name of the
ARC file you chose.  You can extract files from this archive, do a verbose
list of its contents, or cancel the operation by clicking on one of the 
three buttons in the alert box.  If you choose to extract, you'll be given
the same extract options as explained above in the section titled "Using 
ARC Shell".  When the extract or list operation is complete, you can 
either enter ARC Shell (to do some more archive maintenance) or quit back
to the desktop.


   This document and all versions of ARC Shell are Copyright 1987, 1988 
          Charles F. Johnson and Little Green Footballs Software.
                           All Rights Reserved.

   ARC Shell may NOT be sold.  It may, however, be freely distributed as 
long as this document is *  included and neither program nor document are
altered in any way.  This document may not be *  reprinted without 
permission.

   While every effort has been made to ensure that this program is free 
of bugs, I cannot be responsible for any damages or loss of data resulting
from the use or misuse of ARC Shell.

                                    = * =


-------------------------------------------------------------------------


                         ABOUT ST REPORT # 41/42
                         =======================


TRULY it is amazing to see the true colors of the those who would enjoy
witnessing the demise of Atari.  The two issues mentioned in the title of
this commentary brought out the best of those learned individuals and how
true to form they were and are!  

Careful observation on the four major networks has revealed a great deal 
about those who loudly criticized ST REPORT for presenting the
controversial subject matter in the two issues in question.  Anytime 
jealous users of "other" computers can divide and fracture a semi unified
group, they will do so to bring about it's ultimate downfall.....unless 
of course they are overread on another service in a different cpu support
area BRAGGING ABOUT their ACCOMPLISHMENTS!  

To these "respected" Borks, I say "STAY IN YOUR OWN LITTER BOX" and leave
us to ours.  We will eventually clean up our own back yard and more than 
likely our equipment will continue to outperform the other more expensive
also-rans.

In a nutshell, if you hate Atari as you seem to, go back to your own areas
and hate Atari all you wish.  Please don't think we are asleep or born
yesterday.  The truth here is you like to see Atari and it's reps make
themselves look only human and will do anything to make the errors
continue.  You could care less about Atari or the userbase for Atari.

Also, while on the subject of what ifs and whys, the MAIN reason we
reprint certain materials (this is the fifth time this year) is to make 
sure all the folks all the way down the information chain ie: CIS, GEnie,
Delphi -> pvt BBS -> local users -> usergroup newletters -> those ST 
owners who DO NOT HAVE a modem have all the very latest information
pertaining to the ST Userbase.  We hope this answers the question for
those who felt the need to make it seem so pressing in a certain CO.

                                   = * =


-------------------------------------------------------------------------


                                  GFA Basics
                                  ==========
By Rick Taylor
AA-AUG Memo Pad 
July, 1988

                        CREATING 'INSTANT HELP' MENUS

One thing I really admire is programmers who take advantage of the HELP 
key. There are many application programs that excel in this area however,
Flash! and Regentword II (RWII) are my personal favorites.  If, for 
instance, you were typing a document using RWII (as I am now), and your 
memory needed a little jog -- simply press the HELP key, and a 
comprehensive list of functions pops up. After you find what you're 
looking for, just press [RETURN], and it disappears. How would you 
incorporate this feature into one of your own programs, written in GFA 
Basic? Well, obviously it's easy enough to draw the help box and text. 
What we need to know, is how to restore the screen to the state it was in
before the HELP key was pressed.  No problem! GFA Basic 2.0x has a nifty 
graphics command pair called Sget and Sput. Sget will "get" your entire 
screen, put it into a string, and save the image until you use Sput to 
"put" it back. Simple.

To demonstrate the ease of using these commands, I've whipped up a short 
program which will: Draw a graphics image on the screen; wait for the 
HELP key (or ESC key to quit); and, display a bogus help menu on pressing
the HELP key. After viewing the menu, you can press any key, and the help
screen disappears instantly, leaving your previous screen intact. You can
press Escape anytime the menu is not on screen to exit the demo.

The program listing that follows is heavily commented, and the variables 
are descriptive enough that you should have no problem understanding what
is going on. If you would rather download this little program than type 
it in, look for it in Sig 15 of the AA-AUG BBS (714-986-4860), under the 
name GFA_SGET.ARC.


Rem << Demo For Creating 'Instant Help' Menus Using Sget And Sput >>
Rem << From The AA-AUG's Memo Pad -- July, 1988 -- By Rick Taylor >>
Rez=Xbios(4)            ! What resolution are they in?
If Rez=0                ! Low res, too bad!
  Alert 1,"|Sorry, Medium Or|High Res Only...",1," Argh! ",Ans
  End
Endif
If Rez=1                ! Medium res...
  Y0=49                 ! Top of help box
  Y1=148                ! Bottom of help box
Endif
If Rez=2                ! High res...
  Y0=99                 ! Top, and
  Y1=298                ! Bottom for mono
Endif
Size=25                 ! x,y, and radius of circle
Repeat
  Add Size,1            ! Make it grow...
  Circle Size,Size,Size ! Draw it!
Until Size=130          ! Stop drawing it
'
Print At(35,10);"Press [HELP] For Menu"
Print At(35,11);"Escape Key Aborts..."
'
Main:
Do
  Key$=Chr$(Inp(2))     ! Wait for any keypress
  If Key$=Chr$(226)     ! Is it the [HELP] key?
    @Help               ! Gosub 'Help'...
  Endif
  If Key$=Chr$(27)      ! Is it the [ESC] Key?
    End                 ! Yes, so end the demo.
  Endif
Loop
Procedure Help
  ' -------------------------------------------------------------
  Sget Temp$            ! Capture the whole screen into a string!
  ' -------------------------------------------------------------
  Deffill 0             ! Prepare to draw the help box
  Pbox 120,Y0+1,520,Y1+2! Filled box, med or high res
  Defline 1,1,0,0       ! Thin line
  Box 119,Y0,521,Y1+3   ! The outside box
  Defline 1,3,0,0       ! Thick line
  Box 125,Y0+3,515,Y1   ! The inside box
  '                     ! Here is some bogus text for the help box:
  Print At(32,8);"Help With Commands:"
  Print At(19,11);"[F1]=Absolutely Nothing   [F2]=Less Than F1"
  Print At(19,12);"[F3]=Don't Panic!         [F4]=Panic!"
  Print At(19,13);"[F5]=See F3...            [F6]=No Function"
  Print At(19,14);"[F7]=Same As Above        [F8]=Unused Key"
  Print At(19,15);"[F9]=Function Key 9       [F10]=The Last Key"
  Print At(19,18);"     Press Any Key To Return To Demo..."
  '
  Do
    Exit If Inp(2)      ! Just sit and wait for any key...
  Loop
  ' -------------------------------------------------------------
  Sput Temp$            ! Return the screen to its previous state
  ' -------------------------------------------------------------
Return



-------------------------------------------------------------------------


               PEARL HARBOR AGAIN?  *  THE CHIP-RIP/DRAM-SCAM
               ==============================================

by T."Rex" Reade

Where are the history professors?  Where are the veterans?  Most of all,
what is wrong with the US purchasing public?  Is it really this easy to
forget?  Are we all really this blind?   What happened to our Senators and
Congressmen?

Do you sometimes wonder how it feels getting up in the morning and brewing
your cup of coffee in the Jap percolator and then brushing your teeth with
the Jap power toothbrush...going out the door and getting into your handy
dandy Jap import car....driving to work (The Local Computer Plant) and
finding out you don't have a job any longer because the final blow has come
from the Jap whiz kids who have choked off the US Electronics Industry by
manipulation of the chip market.

It sure will be nice to see all the repossesions going back to Japan
because all the US suckers who had to buy Japanese products forgot Pearl
Harbor...Crazy you say?  Take a look at these points.....

The real victims of the chip squeeze (not just drams) are the Companies
that build the computers, laser printers, Fax machines and TVs (watch out
you couch potatoes).  Ultimately you the consumer are going get it in the
neck as you always do.....Hewlett Packard just hiked their prices on
memory boards by 25% blaming drastic Japanese wholesale price jumps.

To give you an example of the seriousness of this CHIP-RIP or DRAM-SCAM,
look at this...Tri-Data Systems in Sunnyvale,CALIFORNIA. had $400,000
worth of chips, approximately 33,000 chips stolen from it's warehouse, 
they now keep them in a steel vault and have posted a $5000.00 reward for
the capture of the perpetrator of the robbery.  Seems Loomis Armoured Car
Service is the only company benefiting from the CHIP-RIP/DRAM-SCAM.

Consider this, at the present rate of exchange, one ounce of 1 mb drams is
worth $785.00....that's worth more than gold!  Japanese industry has
accomplished what the entire Jap military could not do in WWII....they
have made a piece of plastic worth more than Fort Knox' contents..who do
we thank for allowing this to occur?  The chip shortage is now in crisis
proportions and it is time for the US MANUFACTURER to climb all over the
congressmen and senators from each district and say thanks for nothing!

In the year 1985, the Japs flooded the globe with chips.  The result is
exactly what they wanted....they destroyed the American suppliers and had
the entire globe's business to themselves. The BIG THREE in Japan were now
in control, they even wiped out the smaller Japanese companies!

                             FOOD FOR THOUGHT:
                             -----------------
         JAPAN'S BIG THREE WANT TO SUPPLY THEMSELVES, BUILD CUT
          RATE COMPUTERS AND DESTROY THE US COMPUTER INDUSTRY!

Being an election year, many of the Congressmen who voted the for the
special trade agreement are not running for re-election...nor are the
KLUDGE politicians who voted to punish Toshiba for selling some high tech
stuff 2 years ago and setting down the punishment this year..amazingly
while the same high technology is freely exchanged with Russia now...makes
no sense to me except that TOSHIBA, NEC and FUJITSU are all in this
together and ....this reporter would not put it past these latent samurai
warriors from engaging in a "little avenging for the ancestors".  

It is time for the US Industry to wake up and stir the blood life of
independence back into itself...make the chips here and use the chips
here.  Even the UK (England) is about to loose it's computer industry as
result of the Jap scheme, wasn't and isn't England an Allie?  This entire
deal with the Japs is like going to war and buying the AMMO from the
enemy.

Take a look around your home Mr. American, after you have taken an
accounting of the amount of goods from Japan, think of the enormous 
amounts of dollars they grabbed from our country and now, we the same
suckers are going to watch as they INVADE us by building their factories
here and put our people to work?  Wouldn't it be smarter to have US folks
and US dollars build these factories and laboratories to make the US
designed products and retake the world leadership we once so proudly had
and vainly thought we never could loose?

The latest CHIP-RIP/DRAM-SCAM deals are bordering on James Bond scenarios.
For example, Sen. P.Wilson (R-Ca) has charged that Jap chip companies have
stated to small high tech (US) companies.."give us the latest technology
you have and we will make sure you have all the chips you need"...When it
gets this bad, it is time for the US Gov. to fund the planning and
construction of manufacturing plants strategically placed to boost the
sagging economy around the good ole USA.  It is time to put these fanatics
out of the US marketplace by sheer competition and good ole Yankee
ingenuity!  Are we really going to let them have a strangle hold on the
computer market for many years to come?  Can't anyone see that it will
come to a point where THEY will tell us what we can and cannot have as far
as high tech and sophisticated electronics are concerned?

Give Japan a real shock...Let's begin to relieve the dependence on Jap
production to carry the US Electronics Industry, the US Automotive
Industry and the indirect control of all our lives.  BUY AMERICAN even if
it hurts.........

HATS OFF to Atari!  They are going to take the issue on head first!  Atari
will build a chip and computer manufacturing facility in the US in the
very near future.

Texas Instruments, Micron and Motorola are gearing up for enhanced
production of these chips.  They realize that the technology will soon
encompass the manufacture of co-processors, (Motorola makes the
68000), and associated chips which will be the mainstay of the industry 
for many years to come.

It is definitely up to the US marketplace, both the manufacturer and the
consumer, to put an end to the CHIP-RIP/DRAM-SCAM.  Let's all do our
"bit".

                                       Rex.......


--------------------------------------------------------------------------


ST REPORT CONFIDENTIAL
======================

SUNNYVALE, CA.  Atari in a turmoil over the revelation of D/S drives
--------------  shipped in 520STFM units to FEDERATED STORES.

VEGAS - COMDEX  Atari plans to revive all the enthusiastic support it once
--------------  enjoyed by what they plan to do and show here in NOV.

NEW YORK, NY   IBM has reportedly purchased huge amounts of scarce chips
------------   to supply itself and render competition a severe blow.

NATIONAL, USA  ATARI Dealers are reportedly up in arms over the alledged
-------------  preferential treatment Atari has shown to Federated this 
               year over 1040s, 520stfD/S Drives, Mega delivery times, and
               service in general.

SARASOTA, FL   Intersect, in keeping with it's fine tradition of support,
------------   has begun shipping version 1.81 of their highly successful
               Terminal software, INTERLINK.


--------------------------------------------------------------------------


                           The Atari ST Book
                           =================

Reviewed by Ed Zahniser.

One of the joys of the ST computers is also a potential drawback for most
users -- you can buy one and start using it without giving the operator's
manual the time of day.  This puts you out of the starting block like the
proverbial hare, but it may transform you into an eventual tortoise 
because you will never learn the basic shortcuts.  Or, if you do, they 
will come by a painful trial-and-error process.

If you do not subscribe to any ST magazines you are in further trouble 
because nowhere will you be introduced to user chitchat about how to make
ST computing less painful and more productive.

Ralph C. Turner, no stranger to ST World readers, has assembled the book 
that takes you beyond the operator's manual and into a variety of 
eminently useful nooks and crannies of ST lore.  Importantly, the book is
no mere rehash of the manual, but truly takes you beyond it.  In 
addition, it deals with many software hints, not the least of which are 
discussions of productivity-enchancing public domain, shareware, and 
commercial utility programs that make life easier for you and, in some
cases, may prolong the useful life of your ST's disk drive(s), ports, and
various connectors.

Turner's discussion of RAM disks, auto loaders, and auto loading software
utilities would justify the cost of the book for me.  RAM disk use 
particularly for those of us who have only one disk drive -- can 
eliminate serious wear and tear on the drive, not to mention exorcising 
the demon of triple disk swapping to copy one file or document.  I do 
know about RAM disks, but I was not aware of the significance of auto 
loading utilities: you can rig your boot disk to automatically install 
and load the RAM disk on boot up.

It took me several months of owing my ST (before, I had used only C/PM 
and MS-DOS machines) to realize that I could make a backup copy of a file
by using the Save procedure.  Turner tells you that right off.

Chapter 11 offers synopses of some useful public domain software
programs, especially utilities, those handy dandy routines that do things
to, and within, other software programs, or accomplish tasks such as 
telecommunications.  The chapter is well placed for believability
because, by the time you get there, you are accepting of Turner's 
assessment of these public domain programs' value.  He has already 
displayed his own credibility.  This is another chapter that, all by 
itself, makes the book fully worthwhile.  Not that Turner doesn't have 
biases, but these he makes, however unintentionally, clear: he must be a 
chess fiend.  One of the public domain programs is Krabat, the German 
chess program, and the book's concluding chapter is a mini-review of
Chessmaster 2000 and Techmate.

The book proceeds by a combination of Questions and Answers and straight 
discourse.  That format works well.  The Q&A's, evidently based on actual
questions people have asked, give you compact how-to and trouble-shooting
information without more facts than you may want to know.  The straight 
discourse, on the other hand, prevents the deadliness of unrelenting Q&A 
books.

Chapters 14 and 15 deal with word processors and how to pick one (or more)
that suit(s) you.  Chapter 14 describes word processor functions that are
good criteria for judging such software.  Chapter 15 then examines ST 
Writer, 1st Word, 1st Word Plus, Regent Word II, WordPerfect, and 
Microsfot Write by these criteria.  From what I know of two of these 
programs, Turner's assessments seem fair and instructive as well as cost
conscious.

'The Atari ST Book' presents a wealth of hands-on information for the user
and not in the arcane and elliptical language of the programmer that so 
often frustrates those other users.  It is like the best of the articles 
in the ST press, without the hype that accompanies so many such looks at 
software.  Turner has taken an incredible amount of practical and 
pragmatic information, put it through the filter of his own experience, 
and displayed it in an orderly and readily accessible format.  The book
also brings you the chance to ask Turner a question of your own.

The last page in the book is a 'Free Consultation Coupon.'  Send it in 
with your question and a self-addressed, stamped  return envelope and 
Turner will prognosticate for you.  Two appendices offer a list of ST 
magazines -- including those in England and Germany -- and suppliers of 
the products mentioned in the book.

There are helpful chapters on printers and on modems and 
telecommunications, in addition to those dealing with the Item Selector, 
Desktop, Control Panel, files and their management, etc.

A final note: 'The Atari ST Book' does not include any discussion of 
desktop publishing on ST computers.  It was produced by desktop publishing
but on a Macintosh, not on Turner's Atari.  Turner did this mainly because
of availability of a Mac and laser printer through his job.  However, he 
could not have produced the book as nicely on an ST when he did it.  At 
that time, Publishing Partner and Fleet Street were the only contenders. 
Neither of those programs had the sophistication of typographic handling 
that is available on several Macintosh programs.  It remains to be seen 
what Publishing Partner Professional can do in the area of typographic 
handling.  New contenders are Timeworks' Desktop Publisher -- look for 
its review in ST World soon -- and Calamus.  Turner has a second Atari 
book underway.  Perhaps his third one -- and I hope there will be a 
third -- can be done totally on Atari technology.

Ralph C. Turner's 'The Atari ST Book' is a good buy whose practical user 
information will repay the cover price many times over in the savings of 
time, the reduction of frustration, and increased productivity.


                            The Atari ST Book 
                                     of 
                   Tips, Instructions, Secrets and Hints 
                                     for 
                        the 520, 1040 and Mega STs,

                            by Ralph C. Turner.  

                    Index Legalis Publishing Company,
                 P.O.Box 1822-12, Fairfield, Iowa 52556.  
                             (515-472-2293)  
                                 $16.95.  

     Price includes shipping and handling for North American orders.
                 Air mail postage to Europe, add $4.00. 
                  Size: 5.5 in. x 8.5 in., 159 pages.  
                       Reviewed by Ed Zahniser."

 Hints for the 520, 1040 and Mega STs," by Ralph C. Turner.  The book's
 publisher releases the information contained in this file into the public
 domain.

 "The Atari ST Book" is aimed at users rather than programmers, and begins
 where the Atari Owners' Manuals leave off.  The 159-page users' guide
 provides step-by-step instructions that help both beginning and
 experienced users get the most out of their STs.

                        TOPICS COVERED INCLUDE

* RAM disks                            * Files and Their Management
* Using (or Replacing) the             * The AUTO Folder
  Item Selector                        * Copying
* The DESKTOP.INF file and             * Adjusting the Control Panel's
  the Control Panel                      Palette Settings
* Desk Accessories                     * Cold Boots and Warm Boots
* Installing an Application            * Public Domain Software
* Printers and How to Control Them     * Modems and Telecommunications
* Word Processors                      * and many other subjects
* Desktop Tricks

   Includes a List of Over 30 Magazines (Worldwide) with ST Coverage

 "Up until now, the non-programming Atari ST user has been neglected," says
 the author.  "Although the ST can be a powerful and easy-to-use computer,
 many of its features and capabilities haven't been adequately explained in
 language that the average user can understand.  But now, 'The Atari ST
 Book' shows users how to (among other things) embed printer codes in text,
 or use a word processor to alter the DESKTOP.INF file."

                          Index for the Book
                          ------------------
aborting a program, 137                       .ACC extension, 69
applications, 14                              ARCH.TTP, 20, 84, 139
Install Application, 78       ASCII   format, saving file in, 58, 129, 142
text file transfer, 104                       decimal conversions, 97  
asterisk wild card, 23                  Atari ST Reference Directory, 145 
AUTO folder, 37-40                     "first in, first out rule", 39
RAM disks and, 11                       auto loader, RAM disks and, 12
AUTOGEM, 144                            automatic functions, 144
batch files, 144
                              BBSs
Atari Corporation's, 110                other computers' programs, 103
public domain software, 82              locating, 110
blocks of text, choosing, 115           bold, printing in, 94
bombs, crashes and lockups, 141         booting, 73-76
bug when using Item Selector, 32        bytes, 140- amount free, 41
cable extensions, mouse, 143            cable trouble-shooting, 99-100
cables    modem, 103                    printer, 90
warning about, 93, 135                  chess, 146-147
(KRABAT.PRG), 83                        Chessmaster 2000, 146
cold boots, 73                          color adjustments, 62-68
colors, numerical values of, 66         continuing a program, 137
Control Panel                           [Reset], 74
palette setting, 62-68                  control codes, embedding, 94
CONTROL.ACC file                        necessity of, 52
replacing, 54                           two versions of, 53
Control]+[C], use of, 138, 142          Control]+[Q], use of, 138
Control]+[S], use of, 138               Control]+[X], use of, 138
copy-protection, 47                     copying, 41-50
crashes, bombs and lockups, 141         daisy wheel printers, 91
data files vs programs, 14              date, setting of, 53
decimal printer codes, 95               DESK Menu Bar, 69
desk accessories, 69-72, 139            limit of six, 53
DESKTOP.INF file, 51-61                 altering, 56
Install Application, 79                 Directory Line (Item Selector), 29
Directory Window (Item Selector), 32    Directory, Atari ST Reference, 145
disk red lights, warning, 135           disk window updating, 132
disk insertion and window updates, 132  disks, care of, 136
documents, 14                           DOS-type shell, use of, 144
dot-matrix printers, 91                 double width printing, 94
double-clicking, 6, 14                  duplex setting, 106
earphones, connecting to monitor, 142   emulation of other computers, 103
EMULATOR.ACC, 60, 105                   Epson compatibility (printers), 92
EPSON.PRG, 142                          escape code, ASCII, 98
[Esc] key, functions of, 138            extensions, file, 18
FDI.TOS, 84                             file extensions, 18
FILE Menu                               CLOSE option, 17
CLOSE WINDOW option, 17                 SHOW INFO option, 41, 140
file names, 18                          files, 14-26
   and folders, 15                      and wild cards, 22
   renaming, 24                         two types of, 14
floppy disks, care of, 136              folders, 15
   tree structure of, 16                renaming, 24
fragmentation, 46                       FREERAM.PRG, 86
GEM programs, 139                       GET_DEFS.ACC, 54
hard drive crash, 59                    hexadecimal control codes, 96
high resolution adjustments, 67         IBM emulation, 103
icons location on Desktop, 51           removing from Desktop, 140
Install Application, 77-81              Interlink ST, auto feature of, 104
Item Selector, 27-36                    replacing, 34
switching disks, 33                     Universal, 34
joystick cable extension, 143           KEYCOMBO booting program, 76
kilobytes, 140                          KRABAT (chess program), 83
LABELJRB.PRG, 83                        lockups
and bombs and crashes, 141              recovery from, 74
low resolution adjustments, 66          Macintosh emulation, 103
macros, 127-128                         magazine articles, dir.of, 145
magazines with ST coverage, 148-152     medium resolution adjustments, 64
MEGAROID.PRG, 84                        Microsoft Write, review of, 129
modem cables, 103                       one-person use of, 104
originate mode, 106                     
              modems and telecommunications, 100-110
baud rate, 102                          Hayes-compatability, 102
parity setting, 106                     Monitor Master, 143
monitor image, shaking of, 134          resolution and printing, 99
monitors, connecting two, 142           MONOPOOL.PRG, 84
Mouse Master, 143                       mouse cable extension, 143
clicking, 6                             "NAME CONFLICT DURING COPY", 49
OPTIONS Menu                            INSTALL APPLICATION, 78
SAVE DESKTOP, 51                        palette boxes, 64
settings, 62-68                         parallel printers, 90
parameters, modem, 106                  parity setting, modem, 106
paths, file, 20                         pausing a program, 137
primary color sliders, 65               printer codes, 94
Epson compatible, 89                    problems, 99-100
self-test, 100                          printers, 89-100
special effects on, 94                  thermal, 98
types of, 90,                           printing to the screen, 141
program types, 15, 139                  programs vs data files, 14
types of, 15, 139                       public domain software, 82-88
question mark wild card, 22             RAM disks, 7-13
[Reset] button, 75                      for copying, 42
installation, 9                         reset-proof, 9
YARD.PRG, 9                             Read-Only, set file for, 61
Regent Word II                          control codes, 95
review of, 124                          [Reset] button, use of, 73
resolutions, palette adj., 62           ribbons, printer, 92
root directory, 15                      RS232  Config., Set, 60
port, and buying a modem, 102           printer cables, 90
rubber-band, creating with mouse, 115   SAVE DESKTOP, 51
saving file when disk full, 111         screen display, inverted, 62
dumps, 133-134                          image, shaking of, 134
SCREENSAVE.PRG, 86                      Selection Line (Item Selector), 33
self-test of printer, 100               serial printers, 90
shareware, 87                           "SHOW, PRINT, CANCEL", 141
SNAPSHOT.PRG, 134                       speaker volume and earphones, 142
SPOOL.PRG, 86
ST BASIC Sourcebook, printer code conversions, 97
ST Writer, 84, review of, 120           STSPEECH.TOS, 86
TechMate, 147                           text files, 15
transfer of, 104                        time, setting of, 53
TIMEDATE.PRG, 85                       
TOS on disk, and desk accessories, 71   programs, 139
tractor feed, printer, 92               Trash Can, changing name of, 58
TTP programs, 139                       ULTICOPY.PRG, 85
underlining, and printers, 94           [Undo] key, use of, 138
Universal Item Selector, 34             users' groups, 145
magazines, 146                          ventilation holes, 135
VIEW Menu, SORT BY, 136 
VIP Professional, and printer control codes, 96
VT-52 terminal emulator, 60, 105        warm boots, 73
WHEEL-P, 84                             wild cards, file, 22
window disk updating, 132               positions of, irregular, 55
windows, 15                             finding files in, 136
inactive, selecting files in, 132       limiting file display in, 59
Word Writer control codes, 96           word processors, 111-131
WORD400, 85                             WordPerfect, review of, 126
WRDCOUNT.ACC, 86                        WYSIWYG, 111
YARD.PRG, 83                            1st Word
required files, 137                     review of, 121
text files, creating, 142               1st WORD PLUS, review of, 122
| character, producing the, 137

 Marty Herzog, Director of Creative & Marketing Services at Atari (Canada)
 Corporation, has said of the book, " 'The Atari ST Book' is excellent.  I
 recommend it to every ST user."

                            The Atari ST Book 
                                     of 
                   Tips, Instructions, Secrets and Hints 
                                     for 
                        the 520, 1040 and Mega STs,

                            by Ralph C. Turner.  

                    Index Legalis Publishing Company,
                 P.O.Box 1822-12, Fairfield, Iowa 52556.  
                             (515-472-2293)  
                                 $16.95.  

     Price includes shipping and handling for North American orders.
                 Air mail postage to Europe, add $4.00. 
                  Size: 5.5 in. x 8.5 in., 159 pages.  

Information about the book is available upon request.

Ed Note: This volumn promises to be the most authoritive, easy to read and
understand user guide to appear in the Atari Userbase and we
wholeheartedly reccommend it's use.


-------------------------------------------------------------------------


                   REDSKINS STAR HOLLERS DISCRIMINATION 
                   =====================================

by John Deegan

Redskins quarterback Doug Williams said advertising execs are shying away
from him for endorsements of goods because he is black.

Williams, M.V.P. in Washington's Super Bowl win over Denver last Jan., 
was quoted in Friday's USA Today as saying that if Denver's white 
quarterback, John Elway, had been on the winning team, corporate America 
would ''be knocking his door down.'' 

"You don't have to be a Phi Beta Kappa to figure out some things in this
world,"! said the Star Quarterback.

Williams has made only $127,500 since the Super Bowl victory for endorsing
goods.  While it's more than most folks make in a year, it is peanuts
compared to what was made by the last two Super Bowl quarterbacks, both 
white.

The Bear's Jim McMahon made $3 million endorsing goods after the 1986
Super Bowl.  The Giant's Phil Simms made $1 million in endorsements after
the 1987 title game.

Ad Consultant Don Smith acknowledged that race is a factor in choosing 
advertising pitchmen. "If I have a product and I know that of the 1 million consumers who buy my
product, 980,000 of them are middle-class, white WASP families, damn it 
that's what I've got to appeal to," Smith said. 

           Williams has done two national endorsements this year:

[1] An end-of-the-game plug for Walt Disney World that paid him $75,000.

[2] Atari Videogames TV campaign beginning in August that will earn him 
    $50,000. 


--------------------------------------------------------------------------


                                June 27, 1988

FOR IMMEDIATE RELEASE

Contact: Liz Mitchell
   (206) 838-4677

        MIGRAPH RELEASES SCANNED ART FOR GEM PUBLISHING APPLICATIONS

     Migraph, Inc., a leading developer of GEM-based graphics software 
announces the release of ScanArt (TM), a collection of high quality 
graphics and illustrations specially selected for use in desktop 
communications.

     ScanArt designs can be used to produce effective, attention getting 
layouts, newsletters, flyers, brochures, and more.  Over 100 images are 
included in a variety of styles from a wide range of themes such as 
sports, holiday, humorous, and animals, insuring that the user has just 
the right image when needed. Each package contains either two 3.5" disks 
or four 5.25" disks full of images.

     Images in the ScanArt collection originate with professionally drawn
line art which has been optically scanned at either 150 or 300 dots per 
inch.  Each image is then carefully edited to maintain its quality.  
Because ScanArt images are at a much higher resolution than screen 
images, printouts are excellent whether on a dot matrix or laser printer.

     ScanArt images are saved in Digital Research standard compressed .IMG
format and can be used by any application that uses .IMG files such as 
Ventura Publisher, GEM Desktop Publisher and Timeworks Publish-It on the 
IBM and Migraph Supercharged Easy-Draw and Timeworks Publisher St on the 
Atari ST.

                        ScanArt is available NOW
                             Retail:  $49.95.  
                    5.25" and 3.5" formats available.  

          For more information, contact Migraph: (206) 838-4677. 


-------------------------------------------------------------------------


Amex Activity:

COMPILED 07-08-88 [Fegers and Wise]
Reprint permission granted

Stock                 Sales    High    Low    Close   Net Chg. 
Dome Petrol        9,172,000  1 5-32  1 3-32  15-32   unch 
Texas Air          1,790,700  15 5/8  14 3/8  14 5/8  off   1/8 
Wang Lab B         1,319,600  10 3/4  10 1/4  10 3/8  off   1/4 
Amdahl Corp          962,600  53 7/8  50 1/8  50 1/8  off 2 7/8 
Echo Bay Mn          797,600  21 1/4  20 1/2  21      up    1/2 
NY Times             769,300  27 1/8  26      26 3/8  unch 
Atari Corp          *694,400*  9       7 7/8   8 1/2  up    3/8 
Est Air              694,300  16 1/2  16 1/8  16 1/2  up    3/8 
Viacom               657,700  25 3/4  25 3/8  25 3/4  up    3/8 
Lorimar Tel          632,600  13 7/8  13 1/8  13 3/8  off   1/4 

Stock                       Sales      High    Low    Close   Net Chg. 
Apple Computer  (AAPL)  $195,227,000  47 1/2  45      45 1/4  off 1 1/4 
LIN Broadcsting (LINB)   167,195,000  64      54      58 1/8  off 5 7/8 
Apollo Computer (APCI)   157,968,000  15 7/8  10 1/2  10 7/8  off 3 7/8 
Sun Microsystm  (SUNW)   150,205,000  40 3/4  38      38 1/2  off   1/2 
Intel Corp      (INTC)   149,274,000  36 1/4  34 3/4  35      off 1 1/4 
MCI Commun      (MCIC)   117,825,000  15 1/4  14 1/4  14 7/8  up    3/8 
Microsoft Cp    (MSFT)   117,673,000  70 1/2  67      68 1/2  up    1/2 
Miniscribe Cp   (MINY)    69,499,000  13 3/4  12      13 1/8  up  1 
Novell Inc      (NOVL)    65,468,000  28 3/4  26      26 1/2  off 2 
Micron Tech    *(DRAM)*   62,976,000  23 1/2  21 3/8  22 7/8  up  1 1/4 


-------------------------------------------------------------------------
ST-REPORT Issue #43   July 11, 1988   (c)'88 APEInc. All Rights Reserved.
Reprint permission granted except where noted in the article. Any reprint
must include ST-Report and the author in the credits.  Views Presented 
herein are not necessarily those of ST-Report or of the Staff.
-------------------------------------------------------------------------

